Home Improvement

How Do I Know If I Need to Garage Door Repair Services?

If you’ve been wondering “How do I know if I need Garage Door Repair in Mississauga?” here are some things to look for. Noise, out-of-balance, and poor insulation are all signs that your door may need repair service. These problems can be fixed yourself with a few simple maintenance procedures. Follow these tips to keep your door functioning at its best. And, as a bonus, you’ll save money and get the job done sooner.


One of the most obvious signs that your garage door needs repairs is when it becomes noisy. If it is noisy, then its springs may be out of alignment or your torsion springs may be malfunctioning. Whether the noise is a constant rattling or a popping noise, you should have it inspected as soon as possible. In addition, if the noise becomes louder than normal, you should get it replaced as soon as possible.

Another symptom of a garage door that needs repair is a wire at the opener’s terminal. A small wire can jump two wires and pinch the other one. Check for any splinters on the wire or lose staples holding it to the wall. If you notice a wire that is not running smoothly, it might be a common problem and a simple fix is to replace it.


If you think your garage door is out of balance, you should first check that the springs are supporting the weight of the door. When this is the case, you can remove the door from the garage and test its balance. If the door is not moving freely, you can lubricate the rollers and hinges to see if they are loose. If these measures do not resolve the problem, you should contact a garage door professional.

Your garage door should be balanced when it is closed, but it shouldn’t drift all the way. If it drifts, it’s out of balance, and it can cause a part of the door to break. A garage door opener can help you test the balance of your door. If it has a broken spring, you should call a repairman to make the necessary repairs. It may cost a few hundred dollars, but your safety is worth it.

Delayed operation

If your garage door isn’t opening and closing correctly, there are many possible causes. The opener, rollers, or remote control circuitry may all be causing the delay. Delayed operation of garage doors could also be caused by worn-out drive gear. If this is the case, a simple solution is to replace the battery. It’s an easy process for the do-it-yourself enthusiast.

First, check the photo-eye. The photo-eye safety sensor is comprised of two pieces that must align at four feet above the ground. When activated, these safety sensors send a pea-sized laser beam to the opener. If the safety sensors are blocked, the culprit is most likely a miscellaneous object. A misaligned photo-eye is another cause. If the photo-eyes are misaligned, you can remove the obstruction or call a professional to come and fix them.

Damaged springs

Broken or damaged garage door springs are difficult to recognize. In some cases, the garage door might not be broken, but it will sound like a gunshot when the spring snaps. The spring is under pressure and tension and spirals around a shaft. If this happens, call an expert for a professional repair. This service is refundable if you purchase a replacement spring at the same time. If you’ve noticed one or more signs of a damaged spring, don’t hesitate to contact a garage door repairman.


Typically, garage doors experience general wear and tear and the pressure of constant use causes the springs to lose their tension. Garage door springs have massive amounts of energy. They spend the majority of their useful life discharging and recharging by opening and closing. Although proper maintenance can put off this inevitable day, if the springs have reached their breaking point, you’ll need to replace them sooner rather than later.

Leave a Reply

Back to top button